Abstract Preview

Here is the abstract you requested from the IMAPS_2008a technical program page. This is the original abstract submitted by the author. Any changes to the technical content of the final manuscript published by IMAPS or the presentation that is given during the event is done by the author, not IMAPS.

Technology for Medical Human Implants:Vision Chip on Thin Film Multilayer
Keywords: Medical Implants, Vision Chip, Thin Film Mulitlayer
Increasing complexity of today’s electrical circuits lead to a growing demand for thin film “interface” substrates. Such substrates provide an important link between integrated electronics and peripheral accessories like amplifiers or signal processing units. Possible applications lie in the field of laser sub mounts with electrical connections for re-routing or even more sophisticated in the field of medical applications or implants. Whereas conventional thin film multi layers are mostly realized on stiff ceramic substrates (aluminum oxide, aluminum nitride), the extraordinary challenge with medical applications often comes from the required flexibility of the circuit. Biocompatibility and practical handling of the assembly play an important role in these applications. This publication will show general aspects of the fabrication of thin film multi layers, stiff as well as flexible, and show the main differences which may appear, and be requested, in such systems. Also some application examples for multi layer substrates will be shown. A special focus shall be laid on an application for a retinal prosthesis. In this application a vision chip, developed by the University of Ulm, is combined with a flexible thin film multi layer forming a human medical implant for regaining, at least partly, the eyesight for blind people. The special issues of the implantable chip are the low supply voltage and DC free external supply of the circuit. The vision unit itself consists of a 40 x 40 pixels array with light sensors and electrode drivers, which are addressed sequentially to improve power consumption and spatial resolution of perception. This guarantees for a long-time operation and minimization of chemical reactions on the periphery.
Alexander Kaiser, R&D Engineer
Reinhardt Microtech GmbH
Ulm, BW 89077,

  • Amkor
  • ASE
  • Canon
  • EMD Performance Materials
  • Honeywell
  • Indium
  • Kester
  • Kyocera America
  • Master Bond
  • Micro Systems Technologies
  • MRSI
  • Palomar
  • Plexus
  • Promex
  • Qualcomm
  • Quik-Pak
  • Raytheon
  • Specialty Coating Systems