IMAPS Home | Join/Renew | Industry Guide | Edit Member Record
February 10, 2009

Draper Laboratory

Button Registration Deadline Tomorrow Wednesday, February 11 for the Advanced Technology Workshop and Tabletop Exhibition on Printed Devices and Applications (read more...)

Button PDC Webinar Series on Lead-free Electronics – Technology, Manufacturing & Reliability  (read more...)

Button Device Packaging Conference - Hotel Deadline Extended (read more...)

Button GBC Spring Conference on Supply Chain Development for 3D Packaging  (read more...)

   CHAPTER ACTIVITIES (events listed in chronological order)
Bullet TOMORROW: New England Chapter Dinner Meeting Next Wednesday, February 11 (read more...)

Bullet Carolinas Chapter Technical Meeting February 24 at DuPont (read more...)

Bullet Orange Chapter Technical Dinner Meeting February 26 on Advanced TpG Material For The Thermal Management Of Electronics (read more...)

Bullet IMAPS UK Announces MicroTech 2009 - Call For Papers on Bio-Sensors and MEMS Packaging (read more...)

Bullet Viking Chapter March 5 Spring Meeting and Tour at Great River Energy (read more...)

Bullet Keystone Chapter March 26 Dinner Meeting (read more...)

Bullet Don't Miss INTERCONEX 2009 (read more...)

Bullet EMPC 2009 - European Microelectronics and Packaging Conference (read more...)

Get Published With IMAPS (read more...)

AI Technology

IMAPS Events (view full Web Calendar)

Registration Deadline Tomorrow Wednesday, February 11 for the Advanced Technology Workshop and Tabletop Exhibition on Printed Devices and Applications   ^ Top
This new Advanced Technology Workshop and Tabletop Exhibition on Printed Devices and Applications is being held February 25-27, 2009, at the International Plaza Resort in Orlando, Florida. The technical program, exhibitor information, registration forms and other information can be found on-line at

Early registration pricing ends on February 11. All prices increase after the 11th.

This workshop will feature five technical sessions on: Industry Convergence and Technology Transformation; Materials: Substrates, Inks & Epoxies; Digital Printing & Deposition Technology; Printed Devices - Active & Passive; and The New Design and Application Paradigm. Dr. Jennifer Ricklin of the DARPA Strategic Technology Office will deliver a lunch keynote presentation on Thursday. The technical program will also include a university poster session as well as poster presentations from local high school students.

A limited number of table-top exhibits will be available for companies working in the technical areas listed above. To view information about this exhibition, or to reserve your booth(s), visit You may also contact Ann Bell at or 202-548-8717 for information about Tabletop exhibits.

IMAPS has also negotiated Walt Disney Theme Parks Discounted Tickets (Deadline: February 25, 2009). For advance purchase of specially priced Disney Meeting/Convention Theme Park tickets, please visit:

PDC Webinar Series on Lead-free Electronics – Technology, Manufacturing & Reliability   ^ Top
This two-session on-line Professional Development Course (PDC) webinar will be held:
Wednesday, March 18 and Wednesday, March 25, 2009

All webinars will be held 12:00 noon - 1:00 pm EST

IMAPS Members: $125 per webinar; 2-course series $200
Non-members: $200 per webinar; 2-course series $375

Register On-line
Registration Deadlines: March 17, 2009

Key Words

Lead-free alloys, lead-free solder joint reliability, lead-free package and assembly reliability, system reliability, SnPb vs. Pb-free, fatigue, creep, mechanical testing, microstructure, failure mechanisms, failure mode, solder joint surface crack, lead-free solder technology, lead-free production

Program Description

These 2 one-hour PDC lectures can be taken in total or separately depending on the experience level of the student and topics of interest.  Below is a course outline for each session.  Each session is scheduled for 50 minutes of lecture followed by 10 minutes of Q&A.

Session 1 of 2: Wednesday, March 18 -- 12:00-1:00 PM EST

On the tenth anniversary of lead-free implementation in electronics, this lecture provides a holistic view of the state-of-the-art lead-free technology, performance and reliability for both solder joints and assembly systems. A wide array of global production results and the product field service performance have been generated during the last decade. Some were deemed positive and some remain to be resolved, and test results may appear not all coinciding. Yet all product performance and test results manifest the criticality of sound practice. The lecture will highlight the sound practice in all key areas of lead-free electronics. Based on the presenter’s three textbooks: ”Environment-Friendly Electronics-Lead Free Technology” (Electrochemical Publ., Great Britain), “Lead-free Implementation—A Manufacturing Guide” (McGraw-Hills, U.S.A.) and "Modern Solder Technology for Competitive Electronics Manufacturing" (McGraw-Hill, U.S.A.), representative test results will be illustrated. Technology fundamentals in lead-free alloy design will also be summarized including the main differences between SnPb and Pb-free.

  • Industry trends vs. solder joint reliability
  • Lead-free solder technology – fundamentals and critical areas
  • Solder joint reliability – mechanical properties and microstructure evolution vs. services
  • Lead free system – solder joint, PCB/ceramic substrate and components
  • Differences and commonalties between SnPb and Pb-free systems
  • PCB surface finishes – options and impact on performance & reliability
  • Component coatings – options and impact on performance & reliability
  • Two most important production performance parameters
  • Production approaches and representative results
  • Production defects - types

Session 2 of 2: Wednesday, March 25 -- 12:00-1:00 PM EST

The second part of this lecture series will focus on the reliability of electronics packages and assemblies.

  • Likely failure processes and prevention – solder joint vs. system
  • Solder joint thermo-mechancial behavior and degradation – fatigue and creep interaction
  • Solder joint failures modes - interfacial, near-interfacial, bulk, inter-phase, intra-phase, voids-induced, surface-crack, and others
  • Solder joint failure mechanisms – ductile, brittle, ductile-brittle transition fracture
  • Testing solder joint reliability – discriminating tests and discerning parameters
  • Solder joint strengthening metallurgy for increased fatigue resistance and creep resistance
  • Solder joint microstructure evolution vs. strengthening
  • Thermal cycling conditions - effects on test results and results interpretation
  • System reliability including components, PCB/ceramic substrates
  • Reliability and performance in harsh environment – results, comparison, fundamentals, practices

Who Should Attend?

The lecture series provides a working knowledge to all who are involved with or interested in the production and reliability of Pb-free electronic packaging and assembling; also designed for those who desire the broad-based information including the underlying fundamental lead-free technology.

Thomas Green


Dr. Hwang, a pioneer and long-standing leader in lead-free electronics, brings her 29-year manufacturing experience combined with her sustained 19-year lead-free R&D and hands-on production implementation to this lecture. She has been a major contributor to the implementation of Surface Mount production since its inception through hands-on operation and as an advisor to OEMs, EMS and U.S. government. She has provided solutions to many challenging problems, ranging from production yield to field failure diagnosis to reliability issues. Her work covers both commercial and military applications including U.S. Dept. of Defense F-22 program. Among her many awards and honors are citations by the U.S. Congress, Honorary Doctoral degree, induction into WITI International Hall of Fame, named “R&D Star-to-Watch” by Industry Week; YWCA Women of Achievement Award; election to the National Academy of Engineering. She holds patents and has 300 publications to her credit, including the sole authorship of several internationally-used textbooks related to electronic packaging and assembly. Her books, columns, and publications have been widely cited worldwide. Dr. Hwang has been a frequent keynote/featured speaker at worldwide events (United States Patent and Trademark Office, Federal Women’s Program, numerous industry events). Over the years, she has lectured to more than 25,000 professionals and researchers in professional development courses. Her formal education includes Harvard Business School Executive Program and Ph.D. M.S., M.S., B.S. degrees in Materials & Metallurgical Engineering, Inorganic Chemistry, Liquid Crystals Science and Chemistry, respectively. She has held various senior executive positions with Lockheed Martin, SCM Corp, Sherwin Williams Co, and IEM Corp. She is currently a principal of H-Technologies Group, providing business and manufacturing solutions to the electronics industry. She is also an invited distinguished adj. Professor of Engineering School of Case Western Reserve University, and serves on the University’s Board of Trustees. Her books have received a wide circulation worldwide.

  • (ISBN-0-07-143048-2) “Lead-free Implementation: A Guide to Manufacturing” McGraw-Hill, New York, 2005
  • (ISBN-0 901 150 401) “Environment-Friendly Electronics—Lead Free Technology”, Electrochemical Publications, LTD, Great Britain, 2001
  • (ISBN-0-07-031749-3) "Modern Solder Technology for Competitive Electronics Manufacturing", , McGraw-Hill, New York, 1996
  • (ISBN-0-90-115029-0)"IC Ball Grid Array & Fine Pitch Peripheral Interconnections”, Electrochemical Publications, LTD, Great Britain, 1995
  • In Japanese, "Solder Paste: Technology and Applications for Surface Mount, Hybrid Circuits, and IC Component Manufacturing", Van Nostrand Reinhold, New York, 1989
  • (ISBN-0442-2075-49) "Solder Paste: Technology and Applications for Surface Mount, Hybrid Circuits, and IC Component Manufacturing", Van Nostrand Reinhold, New York, 1988

Register On-line

Device Packaging Conference - Hotel Deadlines Extended   ^ Top
The 5th International Conference and Exhibition on Device Packaging is being held March 9-12, 2009, at the Radisson Fort McDowell Resort in Scottsdale/Fountain Hills, Arizona. For more information, visit

This year’s conference will feature technical sessions across 6 technical tracks, panel discussions, a poster session, 8 professional development courses and a sold-out vendor exhibition and technology showcase. The conference provides a focused forum on the latest technological developments in 6 topic areas related to microelectronic packaging: 3-D Packaging; MEMS; Flip Chip; Wafer Level Packaging; Power LED Devices and Biomedical. Technical presentations in these 6 topic areas cover a full range of issues from new developments and materials through manufacturing and reliability. The professional development courses offered are also focused on these 6 topical areas of microelectronics and offer an additional valuable resource to attendees.

The Global Business Council (GBC) will co-locate its Spring Conference March 8-9, focusing on Supply Chain Development for 3D Packaging. There will be several networking receptions and gatherings throughout the week, including a golf outing, the opening reception, meals, and other social events.

The Device Packaging Conference and Exhibition has nearly doubled in attendance and sold out exhibit space every year since its inception. 2009 is no different - the hall is now sold out!

The Hotel deadline has been extended and rooms are still available at the IMAPS rates.

Visit today to learn more about this conference and to register on-line.

GBC Spring Conference on Supply Chain Development for 3D Packaging   ^ Top
The Global Business Council (GBC) Spring Conference on Supply Chain Development for 3D Packaging is being held March 8-9, 2009, at the Radisson Fort McDowell Resort in Scottsdale/Fountain Hills, Arizona. This year's conference focuses on Supply Chain Development for 3D Packaging. There will be several networking receptions and gatherings throughout the week, including a golf outing, the opening reception, meals, and other social events.

Sunday March 8, 2009
12:00 Noon -- GBC Golf Outing.
We-ko-pa Golf Course at the Ft. McDowell Radisson - 
Tee-time of optional golf outing - Cost is $200 and includes green fees, shuttle from hotel, and lunch.

6:00 PM -- Registration Opens and GBC Welcome Reception (Beverages and Appetizers)

Monday, March 9, 2009
All listed times are approximate.
7:00 AM - 5:00 PM -- Registration
7:00 AM - 8:00 AM -- Continental breakfast

8:00 AM -- Opening Remarks and Keynote Address:

Opening Remarks:
Lee Smith, VP of Business Development, Amkor Technology, Inc.

Keynote address:
Market Demand, Applications and Requirements for 3D Packaging and 3D IC
Jan Vardaman, President, TechSearch International

Session 1: Supply Chain Collaboration - From Research and Development to Commercialization of 3D ICs with through Si Via (TSV) Interconnects

Role of Consortia: 9:00 AM - 10:00 AM

9:00 AM
Benefits of Supply Chain Collaboration: TSV Integrated Solutions and Advancements with EMC3D Consortium for Achieving Cost Effective 3D Integration
Rozalia Beica, Applications Director for 3D Interconnect, Semitool

9:30 AM
3D Integration Technology and the Micro-Electronics Supply Chain, Barriers and Solutions

Eric Beyne, Director, Packaging and Interconnect Center, IMEC

10:00 - 10:15 AM - Break

Perspectives from IC Suppliers: 10:20 AM - 11:50 AM

10:20 AM
TSS/TSV Process Partitioning to Leverage Supplier Capability and to Provide Maximum Sourcing Flexibility
Tom Gregorich, Vice President of Packaging, Qualcomm

10:50 AM
3D Integration – Packaging Innovation through Common Platform Ecosystem
Jean Trewhella, Director of Packaging Research and Development, IBM

11:20 AM
Lessons Learned in Quest to be First/Early Commercial Supplier of 3D IC Product. Obstacles Faced from Lack of 3D IC / TSV Supply Chain Infrastructure
Bob Patti, CTO, Tezzaron Semiconductor

11:50 AM - 12:55 PM - Lunch and Keynote on IC Market

Keynote address:
Poised for Quick Rebound
Bill McClean, President, IC Insights

Session 2: 3D Packaging and TSV Roadmap and Supply Chain/Technology Development Packages

1:00 PM
3D Electronics and System in Package Integration: Where it’s at...Where it’s going...
W. R. “Bill” Bottoms, CEO, NanoNexus

1:30 PM
Key Requirements for 3D Packaging using TSVs
Robert Lanzone, Vice President of Advanced Packaging, Amkor Technology, Inc.

2:00 PM
Materials Requirements and Development Issues for 3D Packaging and TSV
Leo Linehan, Global Advanced Packaging Business Development, Rohm & Haas

2:30 PM
Front End/Back End: Morphing the Manufacturing Model for Tough Times
Jim Walker, Research Vice President, Semiconductor Manufacturing, Gartner Dataquest

3:00 - 3:15 PM - Break

Session 3: Multi Sources of Supply and Lessons Learned from 3D Packaging-Based Products

3:20 PM
3D Packaging Trends in Multimedia Handsets from Teardown Analysis
David Carey, President, Portelligent

3:50 PM
Role of TSVs in Future Packaging
Suresh Golwalkar, Principal Engineer Materials, Intel

4:20 PM
Rolling Out a New Packaging Technology; Benefiting from and Maximizing Supply Chain Opportunities that Span the Chain
Marc Robinson, CTO, Vertical Circuits, Inc.

4:50 PM - Closing Remarks and Adjourn
Greg Caswell, VP of Engineering, Reactive Nano Technologies

5:00 PM - 7:00 PM - Device Packaging Welcome Reception
(GBC Attendees Invited - Beverages and Appetizers)

The Hotel deadline has been extended and rooms are still available at the IMAPS rates.

Visit today to learn more about this conference and to register on-line.

The GBC is co-located with the 5th International Conference and Exhibition on Device Packaging which is being held March 9-12, 2009, at the Radisson Fort McDowell Resort in Scottsdale/Fountain Hills, Arizona. For more information, visit

Chapter Activities (events listed in chronological order)

TOMORROW: New England Chapter Dinner Meeting Wednesday, February 11    ^ Top
The New England chapter sections of IMAPS and ACerS will hold a Joint Technical Meeting featuring Mr. Minh Le, Manager of Technical Staff at Evergreen Solar Corporation who will present on "String Ribbon Wafer Process Technology". The meeting will begin at 5:30 PM Wednesday February 11 at the Marriott Courtyard in Marlborough MA. Please see details on the IMAPS NE website

Carolinas Chapter Technical Meeting February 24 at DuPont    ^ Top

Date: February 24, 2009
Time: 12:00 - 3:30 pm

DuPont Electronic Technologies
14 T.W. Alexander Drive
Research Triangle Park, NC 27709


Register on-line at:
Registration Deadline: Friday, Feburary 20

12:00:  Catered Lunch

1:00:  Welcome and Self-Introductions
                Kurt Theorin, Americas Business Director of Microcircuit Materials,                                        DuPont Electronic Technologies

1:15  “The Evolution to 3D IC Integration.” 
                Phil Garrou, Consultant, Microelectronic Consultants of NC. 

2:00:  “Overview on Photovoltaics.” 
                Robert Cockerill, Americas PV Segment Leader, DuPont Electronic Technologies

2:30:   Refreshment Break and DuPont Posters

3:00  “Highlights of Semiconductor Research Corporation’s Sponsored University
                Research in Advanced Packaging’
                Dr. David Seeger, Semiconductor Research Corporation-IBM 

3:30   Wrap-up.
                Draft program for next event (compile possible dates, locations, and presenters).
                Possible Chapter Elections.

Register on-line at:

To comply with government regulations, DuPont has on-site security policies :

1.  Cameras (and cell-phone camera) are not allowed on the site; visitors will told to either to leave their device with security and pick it up upon leaving or to return the device to their vehicle.  
2.  All visitors who are not employed by DuPont are required to show two forms of identification to Security:
A.  At least one must be a government-issued photo ID such as a driver license, Passport, Green Card, etc.
B.  The secondary ID is a second government-issued ID, with or without a photo, or an employer-issued photo ID.
C.  An employer-issued ID without a photo of the person is acceptable, as long as the individual’s name on the ID matches their driver’s license.  
D.  Credit cards cannot be accepted as secondary ID.

Orange Chapter Technical Dinner Meeting February 26 on Advanced TpG Material For The Thermal Management Of Electronics    ^ Top

Date: February 26, 2009
Time: 6:00 pm

Radisson Suites
7762 Beach Blvd
Buena Park, CA
About 1/2 mile south of 91 FWY


Please RSVP to Hossein Ahmad at 310-662-6251 or Bill Gaines -626-812-2199 -

Advanced TpG Material For The Thermal Management Of Electronics
Xiang Liu, Ph.D
Momentive Performance Materials, Inc.

The continuous demand on higher chip power dissipations and shrinking device footprints require innovative thermal management solutions, including materials and cooling technologies. Momentive Performance Materials manufactures a specialty thermal material, Thermal Pyrolitic Graphite (TPG*), which exhibits thermal conductivity greater than 1550W/mK. TC1050* is a composite material Momentive developed to encapsulate TPG* in metal, polymer, and other materials which enables it to be used in heat spreaders, heat sinks, and other thermal management products. In this talk, the characteristics of TPG and TC1050 will be presented. Experimental data from TC1050 applications will also be discussed.

I received my Bachelor of Science degree from Tsinghua University, Beijing, China, and Ph.D. from Northwestern University, Evanston, IL. Both degrees are in Material Science & Engineering. I started my career as a Materials Scientist with GE Advanced Materials (now Momentive Performance Materials) in 2003. I have worked on CVD of nitride films and PVD metal coatings for wafer processing tools for the semiconductor industry. Recently, I’ve worked as an Applications Development Scientist & Engineer, focusing on Momentive’s high thermal conductivity materials, including TPG, for thermal management of electronics.

IMAPS UK Announces MicroTech 2009 - Seminar on Bio-Sensors and MEMS Packaging    ^ Top
IMAPS-UK will be holding a key MicroTech Seminar on “Bio-Sensors and MEMS Packaging” scheduled for Tuesday 3rd March 2009 at the Heriot Watt University in Edinburgh.  The Seminar is co-sponsored by IEEE-CPMT-UK&RI. We seek submissions of learned papers of how the challenge of Design, Fabrication or Applications of Bio-sensors or MEMS packaging is being met by researchers and practitioners.

The Program and other information are available at

Prof Nihal Sinnadurai
Conference Chair MicroTech 2009

Viking Chapter March 5 Spring Meeting and Tour at Great River Energy    ^ Top

Date: March 5, 2009
Time: 2:00 - 4:30 pm
Registration: 2:00 - 2:30 pm
Speaker and Tour to Follow

Great River Energy
12300 Elm Creek Blvd North
Maple Grove, MN 55369


RSVP by March 3 to Char Thomas at REStronics Northland

Professor Roger Ruan,, U of MN
Director of the Center for Biorefiining

Conversion of Plant Algae into BioDiesel Fuel
Help Solve our Nations Energy Dependence with a Plentiful Resource!

Dr. Ruan is a worldwide expert in the creation of renewable energy and other products. He currently is working on the conversion of biomass into food, feed, and fuels, chemicals, and materials, as well as energy crop production, biopolymer and food process improvement.

Great River Energy Co-op
The U.S. Green Building Council has awarded the Great River Energy headquarters building Platinum LEED (Leadership in Energy and Environmental Design) certification. The award is the highest designation available to buildings that demonstrate energy efficiency and sustainability. The building is the first in Minnesota to achieve the distinction and one of fewer than 100 buildings worldwide to receive the designation.

Building Features:
Besides efficient lighting it also features rooftop solar photovoltaic panels, its own wind turbine, a state-of-the-art geothermal heating and cooling system and multiple atriums to harvest maximum daylight. They even capture rainwater to use for flushing toilets and irrigation. See GRE’s media kit. The building will reduce energy consumption by 40%, decrease water usage by 90% and with on site renewable energy replace up to 15% of the buildings energy needs.

Keystone Chapter March 26 Dinner Meeting    ^ Top

Date: March 26, 2009
Time: 4:30 - 8:15 pm

Holiday Inn and Conference Center
432 Pennsylvania Avenue
Ft. Washington, PA 19034



These valuable presentations and dinner are complimentary by registering by March 20 with Greg Chesmar at or 215-822-0510.


4:30    Keystone Chapter Leadership Meeting
            Please attend if you would like to benefit by organizing & presenting at future events.

5:30    Happy Hour – Cash Bar
            Build connections with local peers.

6:15    Buffet Dinner 
            A brief chapter business meeting will be held during the dinner hour.

7:15    First Speaker:  Daniel Quain
           Director, Mission Success and Product Assurance, Cobham Defense Systems
            “Manufacturing Trends for Low Volume, High Complexity Microelectronic                              Assemblies and Subsystems”

(Abstract: A discussion of industry trends in the manufacturing and packaging of microelectronic assemblies for high reliability defense applications.)

7:45    Second Speaker:   Matthew Gruber  
           Manager, Cabinets & Electronics Packaging, Lockheed Martin – MS2
           “Non-Hermetic Packaging of RF Multi-Chip Modules”

(Abstract: The packaging of RF multi-chip modules for military applications traditionally employs the use of hermetic, ceramic-based substrates. Although these packaging schemes have proven to be highly robust in a variety of environments, they also carry a significantly higher cost than non-hermetic alternatives. In order to take advantage of the significant cost opportunities available, a multi-chip module was developed using Monolithic Microwave Integrated Circuits (MMICs) in plastic over-molded QFN packages. The completed assembly was tested and performed almost as well as a ceramic chip and wire module using the same chipset, for less than 25% of the packaging cost.).

Don't Miss INTERCONEX 2009    ^ Top

Date: April 7-8, 2009

Congress Centre of La Villette
Paris, France

Within INTERCONEX 2009, the technical committee is organizing the technical program on the following topics:


  • Packaging & Application of Power LED Devices
  • Packaging and reliability challenges of high pin count circuits

A one day technical workshop on:

  • Microelectronics and packaging for medical and healthcare applications

Technical conferences on the following subjects:

  • Materials improvement (solder, underfill, die attach, thermal interface, ...) and processes (assembly, stacking, packaging,…)
  • Flip-chip (substrates and board technologies),
  • Reliability, thermal management,
  • Advanced Technologies (3 D integration, embedded die, reconstructed wafer, flex,...)
  • Emerging topics (carbon nanotubes, packaging innovation, alternative source integration,…)
  • Modelling, simulation & design, ….
  • Characterization & test,
  • Packaging applications (avionic, telecom, automotive, biomedical, domotic, military,..), and
  • Systems (optic, photonic, harsh environment, …)

The deadline for abstracts has passed and the organizers are now creating the technical program. For more information, visit or contact Florence Vireton at +33 (0) 1 39 67 17 73.

EMPC 2009 - European Microelectronics and Packaging Conference    ^ Top
EMPC is Europe’s premier conference planned every two years in a different European country by the local IMAPS chapter, bringing together specialists from industry and academia. The European Microelectronics and Packaging Conference & Exhibition, EMPC 2009, will be held in Rimini, Italy on June 15-18, 2009. EMPC 2009 addresses “everything in electronics between the chip and the system”. The Technical Program Committee of EMPC 2009 invites you to send abstracts of original work describing recent developments in microelettronics technologies.  The Call for Papers, exhibitors details and other information are available at
Products and Publications

Get Published With IMAPS   ^ Top
We invite you to submit your technical manuscript(s) for peer review for an upcoming issue of the Journal of Microelectronics and Electronic Packaging (JMEP).

The IMAPS Journal is a prestigious, refereed, and archival publication distributed to a qualified audience worldwide comprised of IMAPS members, educational institutions, and corporate libraries. Focused solely on microelectronics topics and the electronic packaging of these technologies, JMEP contains only papers relevant to your business and industry.

Complete information regarding this publication may be found on the IMAPS website at; however, the key points are:

• With such a technically focused publication, you can get to print much faster with JMEP – 2-4 months on average from submission to publication.
• All submissions must be in electronic format, and should be submitted via E-Mail to
• Papers should preferably be formatted and submitted in Microsoft Word.
• Tables, graphs, and photographs should be submitted at the end of the file and need not be embedded in the text.
• Photographs and other illustrations should preferably be submitted as high resolution files
• The Transfer of Copyright form must be filled out on the IMAPS website.

Authors of papers that have been printed in other IMAPS publications or presented at IMAPS workshops are invited to submit updated and/or expanded versions of their papers for possible publication in the Journal.

Please send all submissions, comments, or questions to or feel free to contact me at the phone/e-mail below.


CAD Design Software

Oneida Research Services

PDC Webinar Series on Introduction to Microelectronics Packaging Technology (3 Sessions)
Session 2: February 17, 2009
Session 3: February 24, 2009

ATW and Tabletop Exhibition on Printed Devices and Applications
February 25-27, 2009
Orlando, FL

*Exhibitors contact

Device Packaging Conference and Exhibition
March 9-12, 2009
Scottsdale/Ftn. Hills, AZ

*Exhibitors contact

PDC Webinar Series on Lead-free Electronics – Technology, Manufacturing & Reliability (2 Sessions)
Session 1: March 18, 2009
Session 2: March 25, 2009

CICMT 2009 - IMAPS/ACerS 5th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies
April 20-23, 2009
Denver, CO

*Exhibitors contact

TW on Wire Bonding
July 13, 2009
San Francisco, CA
Parallel to the Adhesives workshop with one admission fee

TW on Adhesives, Encapsulants, Molding
July 13, 2009
San Francisco, CA

Parallel to the Wire Bonding workshop with one admission fee

IMAPS 2009 - San Jose
November 1-5, 2009
San Jose, CA

*Exhibitors contact

TW and Tabletop Exhibition on Intelligent Uses of Precious Metals in Microelectronics
November 5-6, 2009
San Jose, CA

*Exhibitors contact

^ Top

Compex Corp


View the Electronic Bulletin Archives